SCOTTIES CANVAS & MARINE OUTFITTERS
2211 N. TAMIAMI TRAILz
N. FORT MYERS, FL 33903
Toll Free: 800-780-8677
UK (0) 87 1666 0259
Service@ScottiesCanvas.com
|
|
The most recognized brand name in the industry from the company that pioneered the jack plates.
T-H Marine jack plates are constructed of tough aircraft aluminum and features a design that allows full tilt with dual steering.
Natural aluminum finish resists corrosion. All bolts are stainless steel with brass nuts to prevent galling.
Watch the video
T-H Marine Fixed Hi-Jacker™ Transom Jack Plate $129
This tough 3/8" thick aluminum bracket provides an inexpensive solution
to mounting a long shaft outboard to a short transom. Model JP-4FA-DP.
- Also works well as a fixed jack plate for all V6 outboards.
- Handles all outboards up to 225 hp.
- Three engine mounting holes and two transom mounting holes combined with a 3" designed lift.
- Allows a total of 5 1/2" of lift with a full four inches of setback.
- List price is $169. You save $40.
|
|
T-H Marine Manual Pro Hi-Jacker™ Transom Jack Plate
This rugged plate features a solid one-piece design that allows quick and easy adjustment of plate height
with the turn of a single bolt from the top. The unique locking bars inside allow the side locking bolts
to be adjusted from the outside with a single wrench. Manufactured from 3/8" aircraft aluminum stock,
this plate can handle the stresses from all V-6 outboards up to a max of 175hp.
The new "wide side" design adds a full 2" of material in the adjustment slot area for additional strength.
Unit features all stainless hardware with brass nuts to prevent galling. Full four inches of vertical adjustment.
- Built from 3/8" high strength aircraft aluminum stock.
- Single bolt adjustment from the top.
- Full four-inch vertical adjustment.
- Installs in Half the Time of Comparable Jack Plates.
- 6, 8, or 10 inch setback.
- All V6 outboards up to 175 hp.
- Locking bars inside for one-wrench adjustment.
|
|
T-H Marine Hydraulic Atlas Transom Jack Plate
T-H Marine introduces the next generation in jack plate design. The Atlas Hydraulic Jack Plate with an all
new revolutionary design to handle the heaviest and most powerful V6 engines on the market transom jack today.
With the ability to handle the biggest outboards up to 300hp including the heavy 4-strokes. Its innovative high
tech engineered polymer rod and slot lifting design guarantees trouble free action season after season.
The Atlas plate also features the newest concept in one-piece hydraulics from the most respected name in hydraulic
design, so you get the best of all worlds: Speed and Self contained lifting action. This all new pump will lift
the heaviest outboard from bottom to top in less than 8 seconds!
Atlas Series Details:
- Self Contained Hydraulic Pump System - No Reservoir or lines to install.
- Fast! - Bottom to Top in Less than 8 Seconds.
- Rod and Slot Lifting Design - Trouble Free Lifting Action.
- Hi-Tech Engineered Polymer Rods - 6 Times More Abrasion Resistant than Steel.
- Rods Made from Self Lubricating Material.
- Easy Two-Pin Pump Removal - Quick Maintenance.
- Installs in Half the Time of Comparable Jack Plates.
- Available in 4, 6, 8 10 and 12 inch Setback Models.
- All V6 - 300hp Max
- Comes with all necessary wiring and Carling Rocker Switch
|
|
Atlas Transom Jack Hole Shot Plate
An Atlas Transom Jack Hole Shot Plates will compliment any of our Atlas Hydraulic Transom Jacks.
These Atlas Transom Jack Hole Shot Plates will improve fast hole
shot and reduce porpoising and water drag at take off. This is a must have accessory amongst our
top performing tournament professionals.
|
|
Atlas Gauge Kit $159
This digital position transom jack gauge kit compliments the Atlas Hydraulic Transom Jack. The Hydraulic
Transom Jack Gauge Kits send a digital readout with each transom jack
gauge kit number indicating a 1/4 inch rise (Numbers from 0-20).
All of the Atlas Hydraulic Jacking Plates are pre-drilled to fit and gauges
are very easy to install. This is a must have accessory for accuracy with top performing tournament professionals.
|
|
CALL US WITH ANY QUESTIONS! 800-780-8677
|
